logo
Home page Contact
Home Contact
Electrical Transducers
T-IL Loop Powered Current Transducer
Model T-IL

T-IL Loop Powered Current Transducer

The T-IL current transducer converts an ac current input into a load independent 4 to 20mA dc signal capable of driving a number of independent instruments.
Accurate measurement assumes a sinusoidal input waveform.
Power for the unit is derived from the loop current.


Basic Specifications:
InputSinusoidal alternating current
Ranges: 1A, 5A (others on request)
Burden: <0.1VA
Overload: 2xInom continuous, 20xInom for 3 seconds
Frequency: 50Hz, 60Hz
OutputLoad independent dc current
: 4 - 20mA dc <750Ω load
Accuracy: Class 0.5 to IEC 60688
Range: 0 to 120% of nominal input
Loop Supply: 10 - 30V dc
IsolationGalvanic isolation between input & output circuits
Test voltage: 4kV 50Hz ac for 1 minute
TemperatureOperating: -10°C to +20°C to +50°C
EMC Approvals: AS/NZS 61000.6.3:2012
Dimensions
NZ flag
Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.

Valid XHTML 1.0 Transitional