T-ILC Loop Powered Current Transducer
The T-ILC current transducer converts an ac current input into a load independent 4 to 20mA dc signal capable of driving a number of independent instruments.
Accurate measurement assumes a sinusoidal input waveform.
The transducer has a built in ring type current transformer (CT).
The input is achieved by passing the current carrying conductor through the CT.
Standard input current ranges from 0-5A to 0-250A.
Power for the unit is derived from the loop current.
|Input||Sinusoidal alternating current|
|Standard ranges||: 0-5A, 0-10A, 0-15A, 0-20A, 0-50A, 0-100A, 0-150A, 0-200A, 0-250A|
|Bore sizes||: 12mm & 18mm|
|Frequency||: 50Hz, 60Hz|
|Output||Load independent dc current|
|: 4 - 20mA dc <750Ω load|
|Accuracy||: Class 0.5 to IEC 60688|
|Range||: 0 to 120% of nominal input|
|Loop Supply||: 10 - 30V dc|
|Isolation||Galvanic isolation between input & output circuits|
|Test voltage||: 4kV 50Hz ac for 1 minute|
|Temperature||Operating||: -10°C to +20°C to +50°C|
|EMC Compliance||: AS/NZS 61000.6.3:2012|