logo
Home page Contact
Home Contact
Electrical Transducers
T-ILE Loop Powered Current Transducer
Model T-ILE

T-ILE Loop Powered Current Transducer

The T-ILE current transducer converts an ac current input into a load independent 4 to 20mA dc signal capable of driving a number of independent instruments.
Accurate measurement assumes a sinusoidal input waveform.
The transducer has a built in ring type current transformer (CT). The input is achieved by passing the current carrying conductor through the CT.
Standard input current ranges from 0-5A to 0-100A.
Power for the unit is derived from the loop current.


Basic Specifications:
InputSinusoidal alternating current
Ranges: 5A, 10A, 15A, 25A, 50A, 100A (others on request)
Frequency: 50Hz, 60Hz
OutputLoad independent dc current
: 4 - 20mA dc <750Ω load
Accuracy: Class 0.5 to IEC 60688
Range: 0 to 120% of nominal input
Loop Supply: 10 - 30V dc
IsolationGalvanic isolation between input & output circuits
Test voltage: 4kV 50Hz ac for 1 minute
TemperatureOperating: -10°C to +20°C to +50°C
EMC Compliance: AS/NZS 61000.6.3:2012
Dimensions
NZ flag
Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.

Valid XHTML 1.0 Transitional