logo
Home page Contact
Home Contact
Electrical Transducers
T-INTP DC Integrator Transducer
Model T-INTP

T-INTP DC Integrator Transducer

The T-INTP integrator converts a dc signal into pulses.
The frequency of the pulses is directly proportional to the amplitude of the input.
The number of pulses produced is a mathmatical integral of the input signal and may be used to derive kW-hour, amp-hour and similar rate quantities.
The output pulses are available from either relay contacts, open collector or opto-coupler.


Basic Specifications:
InputCurrent Imin-Inom: 0-10mA, 0-20mA or 4-20mA dc
(others on request)Voltage 0-Vnom: 0-50mV, 0-5V or 0-10V dc
OutputPulse rate proportional to input
: Standard relay
: Open collector
: Opto-coupler
Accuracy: Class 0.2 IEC 60688
Range: 0-120%
Auxiliary Supply: 24V, 110V, 230/240V, 400/415V ac ±20%, 2VA
: 12V, 24V, 48V, 110V dc ±20%, 2W
IsolationGalvanic isolation between input, output and auxiliary supply
Test voltage: 4kV 50Hz ac for 1 minute
TemperatureOperating: -10°C to +20°C to +50°C
EMC Compliance: AS/NZS 61000.6.3:2012
Dimensions
NZ flag
Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.

Valid XHTML 1.0 Transitional