logo
Home page Contact
Home Contact
Electrical Transducers
T-VA Apparent Power Transducers
T-VA Transducers

T-VA Apparent Power Transducers (VA)

The T-VA power transducers convert ac current and voltage signals into a load independent dc signal proportional to the apparent power (VA) flowing in the input circuit.

Optional VA-hour (T-VAH) transducers are a combined T-VA and T-INTP integrator in a common housing and give simultaneous VA and VA-hour outputs.
This does not apply to the T-2VA3 & T-3VA4, which because of limited space in the enclosure 100, is supplied as two separate units with the T-INTP integrator in enclosure 55.


Transducer Selection
Single PhaseT-1VA1(H)
Three PhaseBalanced loadUnbalanced load
Balanced supply
without neutral
T-1VA3(H)T-2VA3(H)
Balanced supply
with neutral
T-1VA3(H)
T-1VA4(H)
T-3VA4
Unbalanced supply
without neutral
T-2VA3(H)T-2VA3(H)
Unbalanced supply
with neutral
T-3VA4T-3VA4
Basic Specifications:
InputsAC current and voltage, single phase load
Current: 0 - 1A or 0 - 5A (others on request)
Voltage: All ac system voltages to 440V
Frequency: 50Hz, 60Hz
OutputLoad independent dc current and voltage
(others on request): 0 to 10mA dc <1500Ω load
: 0 to 20mA dc <750Ω load
: 4 to 20mA dc <750Ω load
: 0 to 5V dc >2kΩ load
: 0 to 10V dc >2kΩ load
Pulse (optional): Scalable kVA-hour pulses
Accuracy: Class 0.5 to IEC 60688
Range: 0 to 120% of nominal input
Auxiliary Supply: 24V, 110V, 230/240V, 400/415V ac ±20%, 2VA
: 12V, 24V, 48V, 110V dc ±20%, 2W
IsolationGalvanic isolation between inputs, output circuit and auxiliary supply
Test voltage: 4kV 50Hz ac for 1 minute
TemperatureOperating: -10°C to +20°C to +50°C
EMC Compliance: AS/NZS 61000.6.3:2012
Dimensions
NZ flag
Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.