Carrel Electrade - T-VS Transducer


Home	Contact

Electrical Transducers

Data sheet.

T-VS Self Powered Voltage Transducer

The T-VS Voltage transducer converts an ac voltage input into a dc output signal which is proportional to the rms calibrated rectified arithmetic mean of the input.
Accurate measurement assumes a sinusoidal input waveform.
Power for the unit is derived from the input signal.

Basic Specifications:
Input	Ranges	: 0-150V, 0-300V, 0-500V (others on request)
	Burden	: <2.5VA @ V_nom
	Overload	: 1.2xV_nom continuous, 1.5xV_nom for 10 seconds
	Frequency	: 50Hz, 60Hz
Outputs	Load independent dc current and voltage
	(others on request)	: 0 - 10mA dc <1500Ω load
		: 0 - 20mA dc <750Ω load
		: 0 - 5V dc >2kΩ load
		: 0 - 10V dc >2kΩ load
Accuracy		: Class 0.5 to IEC 60688
	Range	: 20 to 120% V_nom for current outputs
		: 25 to 120% V_nom for voltage outputs
Isolation	Galvanic isolation between input and output circuits
	Test voltage	: 4kV 50Hz ac for 1 minute
Temperature	Operating	: -10°C to +20°C to +50°C
EMC Compliance		: AS/NZS 61000.6.3:2012

Dimensions

Carrel Electrade Limited
Proudly 100% New Zealand owned and operated.